SA-260MA
A powerful vacuum pump autoclave
The autoclaves are used microprocessor design, providing smart logic control for precision temperature monitoring and a full range of settings for diagnostics, drying and pre-programmed sterilization presets.
Great performance on a compact design
- Pre vacuum + pulse air removal
- Post vacuum drying + 0.3μm HEPA filter
- Double Door Lock System
- Emergency button
- Overheating protection
- Pressure overload protection
- Pressure safety valve
- 24 liter chamber (16/40 liter optional)
| SA-260MA | ||
|---|---|---|
| Chamber Volume | 24 L | 6.3 gal |
| Chamber Size | Ø 260 x 450 mm | Ø 10.2 x 17.7 in |
| Water Reservoir Capacity | 4.2 L | 1.1 gal |
| Dimensions (W x H x D) | 533 x 422 x 655 mm | 21.0 x 16.6 x 25.8 in |
| Net Weight | 57 kg | 125.7 lb |
| Gross Weight | 64 kg | 141.1 lb |
| Voltage / Frequency | 220 - 240 V, 50/60 Hz | |
| Power / Current | 1,800 W | |
| Altitude | Under 1,000 m | |
| Air Removal | Pre-Vacuum | |
| Drying | Post-Vacuum | |
93/42/EEC (Medical Device Directive)
PED 2014/68/EU (Pressure Equipment Directive)
EN 13060 (Small Steam Sterilizers)
EN 61010-1 (Safety Requirements for measurement control and laboratory use)
EN 61010-2-040 (Safety requirements for sterilizers used to treat medical materials)
EN 61326-1 (EMC; Electrical equipment for measurement, control and laboratory use)
EN ISO 13485 (Medical Devices - Quality Management Systems)
RoHS (Restriction of Hazardous Substances Directive)
Support Plate
A 304 stainless steel support surface.
Dimensions (W x H x D)
227 x 15 x 525 mm
Sterilization Box
Sterilization box, there are vents on the sides and bottom that can be opened or closed, made of 304 stainless steel.
Container dimensions (W x H x D) :
230 x 180 x 500 mm
Wire-Mesh Basket
Sterilization basket, made of 304 stainless steel wire.
Container dimensions (W x H x D) :
200 x 160 x 500 mm
.jpg)
Tray Set (Mesh Tray)
Round tray holder, with a capacity of three stainless steel wire-mesh trays, made of 304 stainless steel.
Trays dimensions (W x H x D) :
231 x 25 x 500 mm
.jpg)
Tray Set (Sieve Tray)
Round tray holder, with a capacity of three perforated sieve trays, made of 304 stainless steel.
Tray dimensions (W x H x D):
162 x 30 x 380 mm
.jpg)
Tray Set (Plate Tray)
Round tray holder, with a capacity of three stainless steel trays, made of 304 stainless steel.
Tray dimensions (W x H x D):
199 x 22 x 500 mm
Spring Holder
Made of 304 stainless steel, which is easy to load and unload the bagged instruments, and carry out proper sterilization and drying.
Dimensions (W x H x D) :
97 x 122 x 148 mm
RO Water Filter
Filter out dirt odor, chlorine and salt; extending life usage of the sterilizer and quality.
Quicker production & supply RO water.
Water Distiller
Water distiller turns water into steam to remove fluoride, arsenic, lead, viruses and other contaminants, protecting your sterilizer and instruments at a fraction of cost.
Air Filter
Filtering effect of air particles under 0.3μm is over 99.99%.
Cham-mate Cleaner
Autoclave chamber & piping cleaner.
(10 bags/ paper box)
Drain Filter
Filter the impurities in the sterilized waste water to avoid clogging the pipe.
According to the filter condition, it needs to be cleaned or renewed.
Great performance on a compact design
- Pre vacuum + pulse air removal
- Post vacuum drying + 0.3μm HEPA filter
- Double Door Lock System
- Emergency button
- Overheating protection
- Pressure overload protection
- Pressure safety valve
- 24 liter chamber (16/40 liter optional)
