SA-300H
Best for value autoclave
The semi-automatic autoclave model adopts a traditional mechanical design, which is not only durable and can effectively reduce maintenance costs, but also can be upgraded to automatic door closing and drying with a high-efficiency pump and air filter, and has a pressure door lock device to improve the sterilization effect, Safety is also improved.
Best results within a limited budget
- Sterilization progress indicator
- Mechanical control panel
- High durability reduces maintenance costs
- Pressure auto door lock prevents the door from opening at high pressure
- Door safety mechanism is the second door lock protection device
- Overheating protection
- Pressure overload protection
- Pressure safety valve
- Upgradeable to close door drying with air pump
| SA-300H | ||
|---|---|---|
| Chamber Volume | 40 L | 10.6 gal |
| Chamber Size | Ø 300 x 570 mm | Ø 11.8 x 22.4 in |
| Water Reservoir Capacity | 8.4 L | 2.2 gal |
| Dimensions (W x H x D) | 600 x 470 x 740 mm | 23.6 x 18.5 x 29.1 in |
| Net Weight | 66 kg | 145.5 lb |
| Gross Weight | 75 kg | 165.3 lb |
| Voltage / Frequency | 230 V / 50-60 Hz | |
| Power / Current | 2735 W / 11.8 A | |
| Altitude | Under 1,000 m | |
| Air Removal | Gravity | |
| Drying | Bend Heater (Standard) Closed Door with Air Pump (Optional) |
|
93/42/EEC (Medical Device Directive)
PED 2014/68/EU (Pressure Equipment Directive)
EN 13060 (Small Steam Sterilizers)
EN 61010-1 (Safety Requirements for measurement control and laboratory use)
EN 61010-2-040 (Safety requirements for sterilizers used to treat medical materials) EN 61326-1 (EMC; Electrical equipment for measurement, control and laboratory use)
EN ISO 13485 (Medical Devices - Quality Management Systems)
RoHS (Restriction of Hazardous Substances Directive)
Support Plate
A 304 stainless steel support surface.
Dimensions (W x H x D)
227 x 10 x 525 mm
Sterilization Box
Sterilization box, there are vents on the sides and bottom that can be opened or closed, made of
304 stainless steel.
Container dimensions (W x H x D) :
230 x 180 x 500 mm
_40Liter.jpg)
Tray Set (Plate Tray)
Round tray holder, with a capacity of three stainless steel trays, made of 304 stainless
steel.
Tray dimensions (W x H x D):
199 x 22 x 500 mm
Wire-Mesh Basket
Sterilization basket, made of 304 stainless steel wire.
Container dimensions (W x H x D) :
200 x 160 x 500 mm
(For closed door dry model)
Spring Holder
Made of 304 stainless steel, which is easy to load and unload the bagged instruments, and carry
out proper sterilization
and drying.
Dimensions (W x H x D) :
97 x 122 x 148 mm
RO Water Filter
Filter out dirt odor, chlorine and salt; extending life usage of the sterilizer and quality. Quicker production & supply RO water.
Water Distiller
Water distiller turns water into steam to remove fluoride, arsenic, lead, viruses and other contaminants, protecting your sterilizer and instruments at a fraction of cost.
Air Filter
Filtering effect of air particles under 0.3μm is over 99.99%.
Cham-mate Cleaner
Autoclave chamber & piping cleaner.
(10 bags/ paper box)
Drain Filter
Filter the impurities in the sterilized waste water to avoid clogging the pipe.
According to the filter condition, it needs to be cleaned or renewed.
Best results within a limited budget
- Sterilization progress indicator
- Mechanical control panel
- High durability reduces maintenance costs
- Pressure auto door lock prevents the door from opening at high pressure
- Door safety mechanism is the second door lock protection device
- Overheating protection
- Pressure overload protection
- Pressure safety valve
- Upgradeable to close door drying with air pump
