SA-260MA (For FDA)
High Efficacy Vacuum Autoclaves
Simple, high-performance, and affordable, it brings together almost all the advantages of an autoclave in a perfect balance between performance, consumption, and usability.
SA-260MA series has a powerful Built-in vacuum pump. The product we design is not only safe and stable but also has higher reliability than other products, the SA-260MA series allows users to have the best user experience and sterilization performance.
Great performance on a compact design
- Pre vacuum + pulse air removal
- Post vacuum drying + 0.3μm HEPA filter
- Double Door Lock System
- Emergency button
- Overheating protection
- Pressure overload protection
- Pressure safety valve
- Digital Data Recorder (Optional)
- 24 liter chamber
| SA-260MA-R-FDA | SA-260MA-FDA | |
|---|---|---|
| Recorder | USB 2.0 (Max. 32GB) | N/A |
| Chamber Volume | 6.3 gal (24 L) | |
| Chamber Size | Ø 10.2 x 17.7 in (Ø 260 x 450 mm) | |
| Water Reservoir Capacity | 1.1 gal (4.2 L) | |
| Dimensions (W x H x D) | 21.0 x 17.4 x 25.8 in (533 x 442 x 655 mm) | |
| Net Weight | 127.9 lb (58 kg) | |
| Gross Weight | 134.5 lb (61 kg) | |
| Voltage / Frequency | 120 V, 50/60 Hz | |
| Power / Current | 1,400 W / 12 A | |
| Altitude | Under 1,000 m | |
| Air Removal | Pre-Vacuum | |
| Drying | Post-Vacuum | |
- FDA 510(k) premarket notification
- ANSI/AAMI ST55 Table-Top Steam Sterilizers
- UL 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - General Requirements
- UL 61010-2-040 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Particular Requirements for Sterilizers and Washer-Disinfectors Used to Treat Medical Materials
- IEC 61326-1 Electrical equipment for measurement, control and laboratory use - EMC requirements - General requirements
- ASME BPVC Section VIII-1 Rules for Construction of Pressure Vessels
- 21 CFR 820 QUALITY SYSTEM REGULATION
Support Plate
A 304 stainless steel support surface.
Dimensions (W x H x D)
227 x 15 x 525 mm
.jpg)
Tray Set (Sieve Tray)
Round tray holder, with a capacity of three perforated sieve trays, made of 304 stainless steel.
Tray dimensions (W x H x D):
162 x 30 x 380 mm
Wire-Mesh Basket
Sterilization basket, made of 304 stainless steel wire.
Container dimensions (W x H x D) :
200 x 160 x 500 mm
Sterilization Box
Sterilization box, there are vents on the sides and bottom that can be opened or closed, made of 304 stainless steel.
Container dimensions (W x H x D) :
230 x 180 x 500 mm
.jpg)
Tray Set (Mesh Tray)
Round tray holder, with a capacity of three stainless steel wire-mesh trays, made of 304 stainless steel.
Trays dimensions (W x H x D) :
231 x 25 x 500 mm
.jpg)
Tray Set (Plate Tray)
Round tray holder, with a capacity of three stainless steel trays, made of 304 stainless steel.
Tray dimensions (W x H x D):
199 x 22 x 500 mm
Spring Holder
Made of 304 stainless steel, which is easy to load and unload the bagged instruments, and carry out proper sterilization and drying.
Dimensions (W x H x D) :
97 x 122 x 148 mm
RO Water Filter
Filter out dirt odor, chlorine and salt; extending life usage of the sterilizer and quality.
Quicker production & supply RO water.
Water Distiller
Water distiller turns water into steam to remove fluoride, arsenic, lead, viruses and other contaminants, protecting your sterilizer and instruments at a fraction of cost.
Air Filter
Filtering effect of air particles under 0.3μm is over 99.99%.
Cham-mate Cleaner
Autoclave chamber & piping cleaner.
(10 bags/ paper box)
Drain Filter
Filter the impurities in the sterilized waste water to avoid clogging the pipe.
According to the filter condition, it needs to be cleaned or renewed.
Great performance on a compact design
- Pre vacuum + pulse air removal
- Post vacuum drying + 0.3μm HEPA filter
- Double Door Lock System
- Emergency button
- Overheating protection
- Pressure overload protection
- Pressure safety valve
- Digital Data Recorder (Optional)
- 24 liter chamber
